Eljo 2KV20 Wireless Remote Control 2 channels

Description

The SYS 2KV20 radio remote control system consists of the individual components SYS 2KV20R (receiver) and the SYS 2KV20T (manual sender). The used radio modules have obtained an approval the BZT (Federal office for approvals in the area of telecommunication) and CEPT. The operation is free of charge. A special request at the post office is thus not necessary. Approvals also exist in several European countries. The certificates of approval can be made available on request. The radio remote control system can be used for control of external resistive load with a max. load voltage of 24VDC and 5A. The customer is solely responsible for use of the components especially as the duty cycle is concerned. The standard version contains an emergency stop of the cat. 0 that can be initiated automatically or manually. (see emergency stop) With this version integrated filters also permit to operate the receiver in interference-polluted environments in a better way than with standard systems. Securiy against interferences, however, cannot be guaranteed with radio remote control systems in this frequency range. Electromotors and any kind of switching electronic circuits can be interfering components. A sufficient interference suppression must be observed if these components are located close to the system.